• the Australian flag - we ship from our locations in Australia!
  • Now Shipping from our Australian facilities!
  • All prices in AUD.
  • Visit our other locations:
  • LIFE Ionizers.fr
  • LIFE Ionizers.ca - the Canadian flag
  • LIFE Ionizers.uk - the UK flag
  • LIFE Ionizers.com - the American flag
  • LIFE Ionizers Mexico - the Mexican flag
  • LIFE Ionizers South Africa - the South African flag

The Industry Leader in Alkaline Water Ionizer Technologies

E1 Error Message Apply water pressure to the unit and then press the waking/standby button. Does Water exit the unit?

NO Remove the tubing from the outlet connector exiting the prefilter,and turn on the water. Does water exit the pre filter?

Yes, but it then
turn off after 5-10 seconds

  • This could indicate a defective internal water flow sensor.
  • Apply water pressure and press the waking/standby button.
  • Now check the number following LPM located on the front LCD screen.
  • If the LMP is registering 0.0 during extraction then stopping extraction call tech support for further assistance.

Yes, but very slow This indicates a lack of pressure to the ionizer or an expired filter causing flow restriction. Turn your water pressure to maximum. Does the problem still exists?

No The pre-filter is the issue, possibly installed wrong or clogged. Check the installation or call for a replacement.

Yes Check the 1.5"cylinder connected to the inlet connector on the bottom of the ionizer.

  • Remove it and check the screen inside for possible blockage.
  • If the screen was clean reinstall the 1.5" connector.
  • Remove Internal filter #1(located in the ionizer)
  • Turn on the water and press the waking/stanby button.

Does water exit the filter one location?

yes Remove the tubing from the inlet connector going to your pre filter. Now connect that tube to the inlet on the bottom of your ionizer.(Bypassing the pre filter). Apply water pressure and retest.
Did water flow increase?

yes The internal filter's are clogged and need to be replaced. Call filter sales for further info.

No Call Tech Support for further Info.

yes Pre filter is expired and needs to be replaced. Call filter sales for further info.

no The internal filters are expired and need to be replaced. Call filter sales for further info.

Memory usage: real: 16515072, emalloc: 16176600
Code ProfilerTimeCntEmallocRealMem